Can Moen Faucets be Repaired

Can Moen Faucets be Repaired, or Must I Replace It?

Are you tired of dealing with a malfunctioning Moen faucet in your home? It can be frustrating – you go to turn on the faucet and nothing happens, or maybe it’s leaking without a break. What could have gone wrong and how do you fix it?

More importantly, can Moen faucets be repaired, or is this another replacement cost you must bear?

Moen faucets can be repaired with a simple fix or replacement of a damaged component. However, if the issue is more severe due to long-term usage, it may be time to consider a replacement.

Moen faucets are a household name for a reason. But even the best products can experience common issues over time. Don’t panic just yet, grab a cup of coffee, sit back, and keep reading basic troubleshooting solutions to get your Moen faucet working again.

Moen Faucets Can Be Repaired By Troubleshooting

To determine whether you can repair the faucet or will require a direct replacement, there’s one question to ask yourself. Exactly what causes a Moen faucet to stop working.

By determining the exact problem, you can get a more specific answer to whether a repair will be enough, or a replacement needs to be done.

Common causes that can make a Moen Faucet stop working are leaks in any part, damaged components, or loose elements.

You may find a suitable Moen kitchen faucet repair kit for solving some issues. But for a few, you will need more than that.

One more thing to find out is whether a damaged component or part is compensated by Moen. A lot of folks wonder, does Moen have a lifetime warranty?

Most of the Moen products have limited lifetime warranties. You need to check the manual and confirm the warranty period for getting a better clue.

Now, during the warranty period does Moen give free replacement parts? Yes actually!

Moen does give free replacement parts for defects that concern the workmanship of the faucet. For example, if there’s a leak or drip, then you can access the necessary parts for free from Moen to get the faucet working back as normal.

Moen Faucets Can Be Repaired By Troubleshooting

However, there are some clauses you would like to know about from the purchasing paper or manual. But if the warranty period is over and you must resolve the problem yourself, start by going online and downloading the instruction manual first.

Also before starting the Moen kitchen faucet troubleshooting make sure the water supply to the faucet is turned off.

  • Note: some residue water from the cartridge and spout may come out during the process. So be ready with a paper towel or any regular towels to clear the mess.

Access, Inspect & Clean, or Replace The Cartridge

Leaks from the spout are a clear sign of cartridge failure. Some seals could be worn out, causing the cartridge to go bad as well. You need to access the cartridge and check the condition to be sure.

Access, Inspect & Clean, or Replace The Cartridge

Access The Cartridge By:

  • Relieving any water pressure by opening the faucet.
  • Finding the screw cap of the handle. If the handle is wobbly, then you’ll need to try Moen kitchen faucet repair to fix the loose handle.
  • Take out the cap and use a wrench to loosen the screw. The handle should come off easily. If you are dealing with a stuck Moen faucet handle that is hard to turn, you may need to use a hammer for loosening the bind.
  • Take out the retaining nut (it holds the cartridge) using locking pliers. Loosen the cartridge with a screwdriver and take it out holding the valve stem. You may need to use a cartridge puller for getting out stuck cartridges when trying an older Moen kitchen faucet repair.

Now that the cartridge is out, look for nicks or cracks. You may discover some buildup on its body that needs removal. But can a Moen cartridge be cleaned?

Yes, a Moen cartridge can be cleaned by soaking it in citric acid or vinegar for 6-7 hours. You can then rinse the component with clean water and air dry it before putting it back.

But if the cartridge is too old and badly damaged, it may not recover from just cleaning. You will need to replace the Moen cartridge then.

You also need to check the O-rings and gaskets. Remove those using a screwdriver. And replace them using available O-rings and gasket kits with needed Moen faucet repair parts.

Moen Faucet Spray Head Repair

You may need to try the Moen kitchen faucet spray head repair if the leak is on the sprayer when you turn on the water.

Moen Faucet Spray Head Repair

It may mean the connections underneath the faucet are not at fault but somewhere at the top, the actual Moen kitchen faucet repair parts lie where the water pressure is gathering as the water supply is on.

There may be holes near the hose top. And so the leaks are taking place when the water is turned on. You may notice the drips of water going down along the hose length. Changing the Moen spray hose might be needed.

To solve the issue, you may need to tighten the connection between the sprayer head and the hose. Or you may need to replace the damaged washers and rings.

However, if this does not help, a Moen kitchen faucet head replacement is anticipated.

You will need the Moen kitchen faucet head replacement parts, pliers, and a clean cloth for the process:

  • Pull the wand outward from the faucet body as long as the hose will let it go.
  • The hose may retract back to the body. To prevent that, consider tying a cloth around the hose.
  • You will find a metal coupling on the end of the hose. It may sometimes be black non-metallic coupling too. Hold this coupling while using your hand for screwing the spray wand.
  • The hose’s coupling accommodates the screen washer, which you need to remove at this point. It sometimes can also exist on the spray wand’s threaded end.
  • Get rid of the protective cap from the new spray wand. You want to insert the screen washer in the wand. On top of it goes the O-ring (if there is one provided separately).
  • Tighten the hose to the spray wand using your hand. Now get pliers for the hose coupling and make a 1/8th turn.
  • Turn on the faucet and check for any connection leaks. If there are leaks, you need to use pliers for the hose coupling again for making another 1/8th turn.
  • Finally, when all is set, take off the cloth from the hose and let the wand set inside the receptor.

Wrapping Up

So can Moen faucets be repaired, and should you give them a try? I hope the answer is lingering automatically in your mind.

I am going to excuse myself for today. And yes, I will be back with more similar guides like this.

However, if you’d like to research a bit more, consider checking common solutions to leaking Moen kitchen faucets, where I have broken down a few more matters on it.

Good Luck!

Similar Posts