Fix Kraus Faucet Sprayer – Identify Causes and Solutions!

The issue of the Kraus faucet sprayer is common as a lot of people face it. This usually occurs due to dirt in the aerator or the part turning bad, calcium buildup in the hose, and a bad diverter.

If your Kraus faucet sprayer not working, then clean/change the aerator, flush the sprayer hose, and replace the diverter to fix the issue.

In this guide, I’ll inform you of the causes and solutions for faucet sprayer issues. Plus, you’ll learn the direction on how to replace it.

Stay Tune For More! 

3 Reasons Why Kraus Faucet Sprayer Might Not Be Working!

If your faucet sprayer is not working as it used to, there might be three root causes of why it’s acting this way. These reasons are: 

Cause 1: Broken or Dirty Aerator

Another reason the faucet sprayer of Kraus doesn’t work is due to the debris trapped inside the aerator or the part turning bad.

Due to these, it can cause the water to come out in an unstable flow which can be solved if you clean or change the aerator.

Cause 2: Calcium Buildup

Most of the time, water coming from the faucet causes the interior hose to get calcium buildup in the long run. This thing can cause the faucet sprayer to not provide a decent amount of water flow as it needs deep flushing.

Cause 3: Faulty Diverter

Lastly, the diverter in the Kraus faucet doesn’t last longer than a year (in most cases). As it goes bad, the faucet sprayer can flow water in the worst way. And, you can get rid of this if replacing the part.

This Is How To Fix A Kraus Faucet Sprayer!

Now that you know the causes, it would be easier to repair. Based on the 3 causes, here’s how you can fix the bug. Let’s do this together.

Fix 1: Clean or Replace The Aerator

Simply pull the faucet sprayer and insert the aerator key to twist the part. If you don’t have this tool, use a plain screwdriver on both edges and twist it to the left side to open the aerator.

Then, check its condition. if it seems dirty, then soak it inside a bowl and fill the water with the dishwasher. Let it stay like this for a few minutes.

After that, wash it using fresh water. Next, reinsert it if the part seems okay. Or else, insert a new aerator in the faucet sprayer.

Fix 2: Clean The Spray Hose

Start by removing the spray head from the spray hose by twisting it with your hand. Then, pull the spray hose’s tip near the sink. After that, turn on the faucet’s hot water line and let it run for a minute to flush debris.

Now, insert the spray hose and twist it to secure it in the right spot. Again, turn on the water in the cold water line and let it flow for a few seconds. That way you can also fix Kraus touch faucet low water flow problem.

Fix 3: Change The Diverter

At the base of the faucet, you’ll find the cylinder portion pipe. Just twist it and simply lift it on the top. Now, grab the pot filler arm and lift it to find the location of the diverter.

Then, use a pair of needle nose pliers to grab the diverter and then remove it by pulling it out. Next, insert a new one and press it using your hand.

After that, put the pot filler arm downward and twist the cylinder portion pipe to secure it to its place. Test it out!

How To Replace A Kraus Faucet Sprayer?

Whether is Kraus a high end brand or not, the faucet sprayer doesn’t last forever. If it doesn’t operate no matter what you do, this indicates the part needs replacement. To do this in the right way, follow the given directions:

1. Firstly, pull the Kraus faucet spray head part.
2. Then, twist the part to remove it from the sprayer hose.
3. Check the O-ring that is attached to the sprayer hose peak. If it seems bad, change the O-ring, and insert a new one.
4. After that, insert the faucet spray head into the sprayer hose. Be sure to twist it to secure the part in the right place.
5. Next, turn on the water to check whether it works correctly or not. If not, adjust it by removing the part and then inserting it rightly.

Overall Thoughts

Fixing the Kraus faucet sprayer not working issue is easy if you know the causes and use energy to repair the faulty part.

As there are many reasons why the faucet sprayer doesn’t work, it’s best to do the process one after another. FYI, these parts are warranted for a year which you can replace using this facility.

However, if your warranty period for these parts is over, then Kraus will take $150 – $500 to replace or repair them.

Hope this piece of detail helps you to troubleshoot the issue of the faucet sprayer and I’ll meet you in the next guide!