Moen Shower Handle Removal with No Set Screw – Find Out How!
So, you are trying to find a method for Moen shower handle removal that has no set screw. And guess what? There are limited resources on this issue. Perhaps because a Moen shower handle almost always comes with a set screw. Unless you own an old one.
To remove a Moen shower handle with no set screw, you can try twisting the handle counterclockwise and it would come off. In some cases, you may require using grease for stuck handles or even a handle puller to get it out.
This can also be further categorized into trying to remove the shower handle with no visible screws or simply no screws at all. I’ll break down both cases and more in this guide today. Let’s go!
Moen Shower Handle Removal with No Set Screw Is a Rare Scenario – Here’s Why!
In the general case, how do you remove a Moen shower handle? Well, most of the newer shower models from Moen will include a set screw for securing the handle. And unscrewing is all you need to do for the removal of the shower handle.
But then again, you might be owning one of the older models that uses no set screw. It could also be that you are simply looking at a model that comes with no visible set screw. And so it requires exposing the screw with additional steps.
I’ll take into account multiple possibilities and try to give you solutions based on that. But first, let’s hit the most basic removal method to try.
![Moen Shower Handle Removal with No Set Screw Is a Rare Scenario](https://faucetfam.com/wp-content/uploads/2023/07/Moen-Shower-Handle-Removal-with-No-Set-Screw-Is-a-Rare-Scenario.webp)
More Ways to Remove Moen Shower Handle with No Set Screw
Apart from the regular way, you can also try a few more methods. These can help you to remove the handle in case the general method does not work out.
Hidden Set Screws
Perhaps the model from Moen you consider lacking a set screw has one. It’s just not visible and you need to try additional steps for removal to expose the screws. What are those steps and exactly how do you remove a Moen shower handle without visible screws?
You will find specific information about this inside the manual. However, I’m guessing you don’t have it now.
And in that case, head towards the handle and try looking at the front or tip of it. Do you see a cap or cover? If your answer is yes, the screws may be hidden beneath it. The opposite is also likely, but you’ll only find out after removing the cover.
You may also have a round plate right behind the handle. Once you unfasten this plate, the tiny Allen set screw could be underneath. Another point to remember when you cannot see a set screw is that corrosion and calcification can hide it quite badly.
![Hidden Set Screws](https://faucetfam.com/wp-content/uploads/2023/07/Hidden-Set-Screws.webp)
To eliminate this heavy gunk, you can try some solutions at home. Lime Away or CLR are pretty popular cleaning agents that can get rid of the build-up quite easily.
Greasing to Loosen Stuck Handle
Let’s say you have tried to rotate the shower handle to remove it. But it just does not budge from the spot.
This is usually what happens with old shower handles that get used a lot. If you put too much force, the handle will break off. And that’s also not something you’d want. Fixing a stuck Moen shower handle may seem tricky.
![Greasing to Loosen Stuck Handle](https://faucetfam.com/wp-content/uploads/2023/07/Greasing-to-Loosen-Stuck-Handle.webp)
I suggest you use something that can break the obstacle restricting the handle from moving. Usually, this is a mineral build-up or heavy corrosion.
I would grab a spray can of WD-40 to apply a generous amount. The most obvious spot that requires help is the base of the handle meeting the valve stem. A few minutes to a few hours may be required depending on the condition.
And you can try moving the handle, and chances are it would work this time.
Using Handle Puller
![Using Handle Puller](https://faucetfam.com/wp-content/uploads/2023/07/Using-Handle-Puller.webp)
Maybe you tried rotational removal, and it did not work. You perhaps have also considered lubrication but it’s not doing anything. A handle puller is what comes next.
This is basically a tool designed for adding extra leverage and grip that can remove stubborn handles.
With a Moen shower handle removal tool, you will also get instructions to use it. These are super simple to follow and get the job done. So, I would definitely suggest you try one.
Force to Center Dimple
This technique works for some. You can try applying direct force to the handle’s center dimple. This can be done using a regular screwdriver or a pair of pliers.
Use the tool for pushing or prying it against the dimple. And you want to rotate the handle at the same time. Again, excessive force is not okay as it can cause damage.
Keep in mind that you should try these methods only after turning off the water to the shower system. Some showers lack a separate shut-off valve.
You can use the main shut-off valve for the unit in that case. Turning off water in a broken handle can be tricky though, this will require additional caution.
Important Considerations While Removing Moen Shower Handle
Moen Shower Handle Screw Stripped – Now What?
You may consider how to remove shower handles from Moen that have stripped screws. This is what often happens when you use the wrong tool for the screw. Or perhaps due to some accident.
Now how do you loosen a shower handle screw that’s accidentally broken? The most obvious method here is actually sawing or drilling the screw to loosen the handle.
While discussing the removal of a Pfister shower handle with no screw, I briefly discussed the drilling process for removing a broken screw. The procedure stays quite the same for other brand shower handles. So, for the Moen handle, I highly encourage you to check it out.
Does Moen Replace Shower Handle Parts?
If you are considering Moen shower handle replacement, then checking the warranty clauses is what you must do next. The papers you received during purchase should have the sections mentioned.
Generally, Moen provides a one-year warranty for shower systems. And this includes the showerhead, slide bars, hand showers, and also handlers. The aromatherapy shower is covered with a lifetime warranty.
In terms of the smart showers, you should receive a lifetime warranty. This covers not just the mechanical fixtures but also the finishes. However, the application must be for only the home. For commercial or business purposes, the warranty is not applicable.
To avail of the warranty, you must provide proof of purchase. This will help them determine the date and place of purchase, as those are important factors for repair.
Wrapping Up
And there you have it! Moen shower handle removal with no set screw. Try these ideas and see if things work for you. In case you cannot make things work with these methods, consider calling a professional.
You can also directly contact the Moen support team and inquiry about the handle removal process. Keep the model number noted with you before asking them though.
I will see you in my next guide, take care!