Kohler Touchless Faucet Battery Replacement – Step-by-Step Guide

After trying to get my Kohler touchless faucet to work for a few times, I realized that the batteries are dead. With that comes the hassle of replacing it – so it was necessary to know all about the Kohler touchless faucet battery replacement process.

Turns out, it is very simple really – you will need to start by getting compatible batteries. Then you will need to open a few parts of the faucet and locate where the batteries are. Next, open the battery case cover, remove the batteries, and place the new ones in their place.

Here, you will be provided with more details regarding the process so you can get through it smoothly. Alongside that, you will also learn about the signs to look for to replace the batteries.

Reasons to Replace Kohler Touchless Faucet Battery

Has your Kohler faucet stopped working? Not sure if you need to replace your faucet’s battery or not? Well, here are some reasons that you cannot ignore.

Touchless Sensor Does Not Work Anymore

Can you not activate the touchless facility of your faucet by putting your hand right under it?

This is one of the most prominent signs that your batteries don’t work anymore – and also the strongest reason to replace the batteries.

LED Light Not Blinking

When the health of the touchless faucet’s battery becomes questionable, you will see that the LED light indicator is completely red and not blinking at all.

Right after you see that happen, you should replace the batteries.

It Has Been More Than 3 Years

If you have been regularly using your Kohler touchless faucet and if the battery still works fine after 3 years, then you should assume that it is at the end of its life.

Try and replace it in that case before it dies and makes the touchless facility useless.

How to Replace Battery on Kohler Faucet?

Now that you know the location of the battery, it is time to start with the replacement process. Here, we will be discussing all the steps elaborately.

Gather Everything You Need

The first thing that you need is 2 AAA batteries – which are perfectly compatible with your Kohler touchless faucet.

You can also use the Kohler faucet warranty to get discounted ones. Then you need to gather a washcloth, a Philips screwdriver, and a Torx screwdriver.

If you do not have any of the respective screwdrivers, then you can use an alternative or borrow them.

Cover the Drain

Begin by turning off the water supply, which should be under the sink. Then use the washcloth to cover the drain of your sink.

This part is important because the small screws might often get lost through the sink. You can use any alternative you want – as long as the drain is fully covered.

Remove the Screw

Using the Philips screwdriver, you should remove the screw that secures the temperature lever on the faucet body. This is located on the right side of the faucet.

Then you will have to unscrew the spring washer as well.

Once you are done, keep the lever, spring washer as well as screws in a spot where you won’t lose them.

Lift the Spout

Now, you need to find the screw that is located at the back of the faucet. After finding it, use your screwdriver to remove that as well.

This screw basically secures the spout in its place. So once you have removed the screw, lift the spout from the faucet.

Remove the Batteries

Locate the batteries after you are done removing the spout, lever, and spring washer. After you have located it, use the Torx screwdriver to remove the screws that secure the battery case cover.

Remove the case cover, and take out the previous batteries.

Insert the New Batteries

It is time to insert the new batteries in place of the old batteries. Make sure to get the placement right, or it will not work.

For that, you will have to put make sure the negative side is pointing up when placed on the left side.

Similarly, the positive side should be pointing up when placed on the right side.

Place the Battery Case

At this point, you need to ensure the proper placement of the batteries. This means that they should be perfectly put into their spots before you place the battery case.

After ensuring, place the battery case in its spot. Then attach the screws until the case cover is fully placed.

Final Touches

Now you need to put everything back the way it was. Start with the spout – attach the screws after the spout has been placed where it was previously.

Next, you need to attach the temperature lever where it used to be.

The spring washer also needs to be attached to the faucet after that. Then remove the washcloth and turn on the water supply.

Wait for 5 minutes before you turn the faucet on.

Frequently Asked Questions

1. Where is the battery in Kohler touchless faucet?

All Kohler touchless faucet have their batteries in the same place – that is, beneath the faucet. You will notice that they usually have been attached using a mounting screw, which is why it is required to use the Torx screwdriver to open them.

2. Can touchless faucet work without batteries?

Yes, the touchless faucet can work without batteries. However, you will not be able to use the sensor technology if the faucet is not powered – you will just have to use it manually.

3. How long do batteries last in Kohler touchless faucet?

You can expect the batteries to last for at least 2-3 years in Kohler touchless faucet. But it really depends on the frequency of use. The batteries can have a longer or shorter lifespan, depending on that.

4. Why did my touchless faucet stop working?

In most cases, when a touchless faucet does not work anymore, it is mainly due to the batteries. Hence, get the batteries checked or replace them if necessary.

5. How long do sensor tap batteries last?

You can expect them to last for 2 years at least. With proper maintenance and less usage, their lifespan can be elongated.

Final Words

Once you get to know the Kohler touchless faucet battery replacement process, things will seem very simple and easy for you.

Sure, it can be a little lengthy, but if you take one step at a time, it will not be hassle-some at all.

Still, if you feel like this is not something you can execute on your own, then you can ask someone with experience to help – or hire a plumber.