No Water In Kitchen Sink But Everywhere Else! [SOLVED]

You would generally want constant access to water in the kitchen sink. After all, it is where you start preparing all the food. So, finding no water in the kitchen sink but everywhere else can be very frustrating. But what causes it?

If there is no water in the kitchen sink but everywhere else, it is likely due to a clogged cartridge. The pipes can have clogs too. If that is the case, you are mainly dealing with corrosion and rust or heavy metal deposits.

But there could be other reasons too. For each root cause, there’s a specific fix. And if you keep reading, you can get an in-depth idea about each.

Common Causes of No Water in the Kitchen Sink

Here’s a closer look at why the kitchen sink may not offer any water at all –

1. Damaged Kitchen Faucet

The faucet itself can prevent the water from flowing. But what could go wrong with the tap? Firstly, the faucet’s washer might have been dislodged or damaged.

If this is the issue’s source, you will likely notice the faucet trickle water before it stops flowing water entirely.

Secondly, there could be debris buildup within the pipes. Also, the faucet cartridge can get clogged due to minerals, corrosion, and heavy metal deposits.

2. Frozen Waterline

Do you live in an area where the temperature goes below freezing? If so, the water line connecting to the kitchen faucet might have frozen. This is a common problem for water systems with enclosed pipes.

3. Leaks within the Water System

Over time, the pipe of your water supply wears out. Rust and corrosion start to form, which eats the parts of the line. That eventually results in massive leaks, preventing you from getting water in the kitchen faucet.

4. Blocked Aerator

The main task of the aerator is to control the flow of water. There’s a kitchen faucet flow restrictor too. And as you might have guessed, minerals and debris can clog them up, making you end up with no water flowing through the spout.

How to Fix a Kitchen Sink with No Water

You will not need to go through any intricacies to troubleshoot the no-water issue. All you have to do is follow these troubleshooting procedures –

1. Check the faucet washer and replace it if needed

Disassemble the faucet and inspect the washer. Does it appear to be torn or damaged? In that case, you must replace it with a new one. Take the help of the user manual to find the correct replacement.

2. Clear the blockages within the aerator

If the issue is with the aerator, you should remove it and clear the blockages. To do so, go through these steps –

3. Clean the faucet cartridge

As mentioned earlier, blockages within the cartridge can cause the faucet to not offer any water. But the good news is that you can clear out these blockages too. Take a look at the steps –

However, if the cartridge appears worn out, you should replace it. Again, refer to the user manual to find the right replacement part.

4. Heat up the frozen pipe

Before anything else, you should ensure you are dealing with a frozen pipe. And it’s as easy as it sounds. You just need to hold the line with your hands and see whether it is at a freezing temp.

If so, the temporary fix would be to use a heating gun and unfreeze it. And a semi-permanent solution would be to keep the closet doors open. That will let some heat in and prevent the pipe from freezing.

5. Check the plumbing system and replace the damaged pipes

Went through all the steps above but still not getting any water from the kitchen sink! There’s a high chance you are dealing with damaged lines.

Here, you must first closely inspect all the pipes and see whether there is visible damage. Is the leak minor? You should use plumbing or Teflon tape to fix the leak.

On the other hand, if the leak appears to be severe, you should get the pipes replaced. It would be a good idea to get high-quality lines with rust-resistance traits. That will prevent this issue from reappearing in the future.

The Kitchen Sink Water Pressure Is Low, but Other Faucets Are Fine. Here Are Some Easy Fixes

No water in the kitchen but everywhere else is one thing, and getting low water pressure in the kitchen faucet is another. This problem requires some very specific fixes. Take a look –

1. Fix the shut-off valve errors

Your sink has a dedicated shut-off valve. As the name suggests, it can cut out the flow of water. Wondering where can you find it? It typically remains underneath the sink. See whether it is all the way open. If not, you should adjust it.

2. Clear the cartridge and aerator

Over time, minerals can deposit within the cartridge and aerator, reducing the water flow. In this case, remove the parts, soak them in a vinegar-filled bowl, rinse, and install them back in place.

3. Fix the leaks within the water lines

There could be small leaks within the water lines. These leaks will not stop the water flow but can reduce the pressure. Here, you should check the condition of the lines and fix all these leaks with Teflon or plumber tape.

Final Words

No water in kitchen sink but everywhere else can definitely ruin your day. But as you can see, you generally need to check the aerator and the cartridge to fix the issue.

However, if you are still facing the problem after going through all the troubleshooting steps mentioned here, you need to get your water supply system checked by a professional.

That said, if your cold water taps are not working, you will need to follow a different approach.