Are Delta Faucet Parts Interchangeable? – Find Out Here
After searching for a replacement handle for my Delta faucet, I almost gave up. I couldn’t find the one that was specifically on my faucet model.
So, I started wondering – are Delta faucet parts interchangeable? Because, in that case, I can use the handle of another model.
Now, the thing is, all Delta faucets are compatible with one another, which makes their parts more or less interchangeable. But that does not mean you can interchange all the parts. Some of them are not interchangeable, and you will have to find that out through more research.
Here, we will provide more information on how you can find that out, what you should consider, and which parts are interchangeable.
Extensive Guide on What Delta Faucet Parts Are Interchangeable
Not finding a specific part for your model of Delta faucet? Well, find out here if you can interchange those parts or not with another model of Delta faucet.
Handles
Most Delta faucet handles are interchangeable. However, it still depends on the type of Delta faucet that you are using.
For instance, a single-handle faucet may not have an interchangeable handle with a double-handle faucet and vice versa.
And for more insights, you should do more research on the model of the Delta faucet that you are using and check if the handle of the other model would work or not.
Spouts
The spout happens to be one of the most important parts of a faucet. It delivers the water from the body of the faucet to outside the faucet.
And spouts can be of different lengths and designs.
They can be interchangeable if the designs happen to be the same. However, if the lengths and designs heavily differ, then you cannot interchange them.
Cartridges
Usually, this is the part of a faucet that controls the water flow. And hence, the cartridges go bad before any other part because of all the pressure that they have to handle.
Since all Delta faucets are compatible, you can expect the cartridges of all models to be interchangeable. But just to be sure, you go do more research on the models before interchanging.
Valves
There are four types of valves in a faucet, and four of them serve different purposes. And the good news is that valves are interchangeable between the different models of Delta faucets.
Just make sure you are putting the right valve in the right places if you have taken the responsibility of interchanging and installing them all by yourself.
Faucet Body
The faucet body is basically the part that keeps everything together. Among that, the body also keeps water in it. This is where the control of temperature and pressure comes in.
Since most faucet bodies can contain different designs and such, it is difficult to interchange this part between the different models of Delta faucets.
O-rings
O-rings play quite an important role in faucets. This small rubber component is located in the spout of a faucet and makes sure the faucet does not leak from time to time.
But just like any other part, this can give in as well.
So, if you cannot find the O-ring for your model Delta faucet, then you can use one of the other models.
They are perfectly interchangeable, so there is nothing for you to worry about.
What to Consider Before Interchanging?
Now, before you use the components of one model of Delta faucets for another model, there are a few things that you should consider.
Here, we will be discussing those things in detail.
Have You Determined What the Problem Is?
Before you replace one part of your Delta faucet, have you actually looked into the problem thoroughly?
Often, the problem is not what it seems to be. So, try to get to the depth of the problem to replace the part that actually needs to be replaced.
Have You Talked to a Professional?
If you are having difficulty understanding whether the specific part of your Delta faucet would be interchangeable or not, you can try consulting a professional.
They can provide better insights into the specs of your model and its parts.
Have You Gone Through the Specs Sheet?
With enough knowledge of the specs of your model, you can do all the research by yourself.
You can go through the specs of the parts that your Delta faucet contains and then check if the parts would be interchangeable or not.
Have You Considered a Full Replacement?
Instead of interchanging the parts, maybe it is time to go for a full replacement of the faucet itself.
To determine that, check how deep the problem is and for how long it has been there. Also, if your faucet has passed 15 years, then replacing it is a good option.
Frequently Asked Questions
1. Are Delta faucet handles interchangeable?
That depends on the designs and mechanisms of the handles. But most Delta faucet handles are interchangeable – to the point where they also give off the impression that the handles are universal.
2. Are faucet parts interchangeable?
Faucet parts are interchangeable among the models of the same brand. However, it is often impossible to interchange the faucet parts among different brands.
3. What trim is compatible with the Delta valve?
The trim kit series that are compatible with the Delta valve are − 13, 14, 17, and 17T.
4. Can you replace the Delta faucet handles?
Yes, you can replace Delta faucet handles. In fact, the process of replacement is so simple that you can do it by yourself – without the help of a professional.
5. How do I know what Delta cartridge I need?
To know what Delta cartridge you need, you should look up the model number on the official website. It will also provide the specs of the cartridge – giving you all the information you need.
Final Words
Are Delta faucet parts interchangeable? Well, we can say both yes and no to that, depending on which model and the part we are talking about.
That is why I would suggest you look into your faucet models more before you decide to interchange.
