Single-Hole Faucet Vs. 3 Hole – The Best Choice
More than learning about the difference between the single-hole faucet vs. 3 hole, I was more intrigued about learning which one is better. But for that, a thorough comparison between the two is required.
By comparing the two, I learned that they both contain benefits and shortcomings. For instance, a single-hole faucet is easier to install and saves up your space. Whereas a 3-hole faucet provides the facility of temperature control and is convenient to maintain.
Similarly, there are other factors where one of them might excel while the other fails. And you can find out about all that right here.
What Is a Single-Hole Faucet? – Pros and Cons
A single-hole faucet is basically a faucet that only needs one mounting hole to be installed. So, sinks with one hole can easily accommodate faucets like this.
![](https://faucetfam.com/wp-content/uploads/2023/02/Single-Hole-Faucet-1.jpg)
They are very easy to install, and their maintenance is quite convenient as well. You will usually find these faucets installed in smaller sinks.
They do not provide much water pressure, so they are barely installed in larger sinks. Moreover, the temperature control is not very precise with these.
Let’s take a look at their pros and cons.
Pros
- Compact and doesn’t take up much space
- Easy to install
- Doesn’t take time and hassle to clean
- Relatively cheaper
Cons
- Doesn’t go with every interior
- Little to no temperature control
What Is a 3-Hole Faucet? – Pros and Cons
3-hole faucets are often known as widespread faucets. But there are other types of faucets as well that require 3 holes to be mounted on the sink – such as centerset faucets.
![](https://faucetfam.com/wp-content/uploads/2023/02/3-Hole-Faucet.jpg)
These provide more water pressure and more precise temperature control.
However, you will have a more difficult time installing and repairing them due to their design. That is why most people don’t tend to prefer these at home.
Let’s get an overview of the pros and cons.
Pros
- Provides precise temperature control
- More water pressure
- Looks good with every interior
- It can be maintained quite effortlessly
Cons
- Difficult to install
- It cannot be repaired without professional help
3-Hole vs. 1-Hole Kitchen Faucet – Which One Is Your Choice?
Even after knowing all about the two kinds of faucets, it can be difficult to determine which one would be the best for you. That is why, here, I will be comparing the two and help you decide in the meantime.
Spread of Water
When comparing single-hole and widespread faucets, it only makes sense that the latter provides more water pressure. That is because 3-hole faucets take water from 3 mounting points, giving them more access to water.
But a 1-hole kitchen faucet will only contain one mounting point – hence less spread of water across the basin.
Number of Handles
If your faucet has been mounted using 3 holes, then having two handles makes the most sense. This allows the user to control the temperature with the perfect mix of hot and cold water.
But the thing is, this control in temperature might not be possible with a 1-hole faucet – so getting a single-handle faucet would be the best option.
Installation
When it comes to the installation process, you will definitely find the 1-hole faucets to be more convenient. You can also install them by yourself if you have the instructions.
But with 3-hole faucets, you will need to hire a plumber. The design of these faucets is quite complicated, so you won’t be able to install them by yourself.
Style
You will find 3-hole faucets in various styles. They are very versatile in this sense, and you can choose from a wide range of options.
This will also give you the advantage of choosing one that goes with your sink.
On the other hand, 1-hole faucets might not provide as many options – which might limit your style choices.
Design
The design of 1-hole faucets is a lot simpler than 3-hole faucets. This aspect of 1-hole faucets also makes them more user-friendly. In fact, you will also be able to repair them easily due to this.
Due to the more complicated design of the 3-hole faucets, you won’t be able to repair them by yourselves – the same goes for 4-hole faucets.
Maintenance
3-hole faucets are very easy to clean and maintain. Thanks to their gapped design, you can effortlessly go in between the handles and spouts and clean them.
Maintaining 1-hole faucets is also quite effortless, but it also depends on the design of the faucet exterior. For instance, if the design is quite complex, then you will have to spend more time on cleaning it.
Sink Size
Since 3-hole faucets require a wider space for installation, it is best to install them in larger sinks. Not to mention, in smaller sinks, their water pressure will cause more splashing.
Similarly, 1-hole faucets are more compact and should be installed in smaller sinks. Even in smaller sinks, they will leave behind a lot of counter space.
Temperature Control
You will be able to install double-handle faucets with 3 mounting holes. This will also allow you to control the temperature well.
But 1 hole faucets rarely contain more than one handle, and so you will probably not be able to control the temperature with those.
Frequently Asked Questions
1. Can you replace a 3-hole faucet with a single?
Yes, it is possible to replace a 3-hole faucet with a single-hole faucet. Despite that, it won’t be the wisest decision because then you will have to close the other holes in the sink.
2. Can you convert a 3-hole with a single?
Converting a 3 hole with a single is not entirely impossible. Though it is still not recommended because you will probably need an adapter for the process – which will just add to your costs.
3. How much do 3 holes to 1 hole faucet adapter cost?
3 holes to 1-hole adapters are quite costly. You can get a good one for $50. The price range can vary depending on the quality and the material of the adapter.
4. Is a single-hole faucet better than a 3 hole?
A single-hole faucet is better than a 3 hole if your sink is compact and if temperature control is not a concern for you. Moreover, they also tend to be cheaper in general.
5. How much does a 3-hole faucet cost?
A 3-hole faucet can cost anywhere between $50-$2500. So you can easily set a budget according to your convenience and your brand preferences.
Final Words
Have you been able to decide between a single-hole faucet vs. 3-hole faucet? I would suggest you note down the things you are looking for, the size of your sink, your budget, and other concerns.
Eventually, with the knowledge of their comparison and also of what you need, you will be able to select the best one for yourself.